ebike introducing
It is only natural for us to ask whether or not electric bikes can get wet. Fundamentally, electricity and water bode poorly for most electronics out there, so it’s a fair and wise question to ask when we’re talking about an investment such as an eBike.
The answer to the question is yes, electric bikes can get wet. Most electric bikes are water-resistant, so they can withstand rain and splashes without problems. However, avoiding riding your electric bike in deep water or submerging it is important, as this can damage the electrical components.
All the electrical components incorporated into an eBike are water resistant, with casings protecting them from water or dust particles. But that doesn’t make them waterproof, but rather, water resistant. There’s a big difference between these two ideas; knowing how they are defined can help riders avoid killing their bike’s electrical system.
The Difference Between Water Resistant and Water Proof
Water-resistant and waterproof are terms often used interchangeably but have different meanings. Water-resistant materials can withstand some water, but they will eventually become wet or damaged when overwhelmed. Waterproof materials, on the other hand, are completely invulnerable to water.
If you plan on riding your eBike in the rain regularly, you may want to consider purchasing a bike with a higher IP rating. IP ratings measure the level of protection that a product has against water and dust. A higher IP rating means the product is better protected from water and dust.
Here is a table of IP ratings and their corresponding levels of protection:
IP Rating
Protection Against Water
Protection Against Dust
IP00
No protection
No protection
IP1X
Protection against vertically falling drops of water
No protection
IP2X
Protection against water spray from any direction
No protection
IP3X
Protection against water spray from any direction up to a 60-degree angle
Protection against dust particles that can cause a problem with the operation of the product
IP4X
Protection against splashing water from any direction
Protection against dust particles that can cause a problem with the operation of the product
IP5X
Protection against water jets from any direction
Protection against dust
IP6X
Total protection against dust and water
Total protection against dust and water
Inquiry into a product’s IP rating can be tricky, and often, you’d have to contact a manufacturer (or perform a rigorous Google search) to determine the IP rating of your bike’s electrical components.
Tips for Riding Your eBike in the Rain
Setting the “can electric bikes get wet” question aside, circumstances might dictate whether or not you’re going to take a trek through the wind, rain, and other undesirable conditions that ride along with them.
If you are faced with having to take a trip on your eBike through wet conditions, it’s better to be prepared rather than wet, caked in mud, and miserable (unless that’s the kind of thing you’re looking for). Here are some tips to keep you as dry as possible, keep your eBike in the best riding condition through these circumstances, and ensure you erase any weather-related wear you might be putting your bike through.
Use Fenders on your eBike
Some people like the looks of fenders, while others may not. Love or hate them, bike fenders serve a handful of good purposes that you should consider, particularly if you’re more likely to use the eBike in lousy weather or wet areas.
1. Fenders help to keep you dry. When you ride your eBike in the rain, the tires can kick up a lot of water. This water can splash up and onto you, making you wet and uncomfortable. Fenders help to prevent this by deflecting the water away from you.
2. Fenders help to keep your bike clean. When you ride your eBike in the rain, the tires can also kick up a lot of dirt and debris. This dirt and debris can get all over your bike, making it look dirty and more difficult to clean. Fenders help to prevent this by deflecting the dirt and debris away from your bike.
3. Fenders help to extend the life of your bike. The water and dirt that can get kicked up by your tires can damage your bike’s components. Fenders help to prevent this damage by keeping the water and dirt away from your bike.
We at Hijoebikes are happy to have an array of fenders and other bike accessories on hand if your model didn’t already come furnished with a pair. Even if the looks of fenders aren’t appealing to you, they can be taken off or put back on whenever you think it’s a good idea to try and control some tire splatter.
Wear Waterproof Clothing
Wearing waterproof clothing when riding an e-Bike is a good idea for several reasons. When I say waterproof clothing, I’m talking about working from the ground up, including rain jackets, pants, and even waterproof shoes. Here are three great reasons to use waterproof clothing:
1. It can help you stay dry. You will likely get wet when you ride your eBike in the rain. Even if you have fenders, it is possible for water to splash up onto you. Waterproof clothing can help you stay dry and comfortable, even in the rain.
2. It can help you stay warm. When you are wet, you lose heat more quickly. Waterproof clothing can help you stay warm by preventing your body heat from escaping.
3. It can help you stay safe. When you are wet, you are more likely to slip and fall. Waterproof clothing can help you stay safe by providing a layer of protection between you and the ground.
Inspect Your eBike Regularly
Inspect your eBike regularly after riding in wet conditions because water can cause damage to the electrical components and other parts of your bike. Here are some of the things you should check for:
1. Confirm the brakes are working correctly and the brake pads are not worn down.
2. Check the cables for any signs of rust or corrosion.
3. Check the motor for any signs of water damage.
4. Check the battery for any signs of water damage.
5. Check all other components for any signs of water damage.
If you find any problems, taking your eBike to a qualified mechanic for repairs is important if you’re not experienced in this area. Here are some tips for keeping your eBike in good condition after riding in wet conditions:
· Dry your eBike off after riding. Use a clean, dry cloth to rub down your bike’s surfaces.
· Lubricate your bike regularly. Doing so will help to protect the moving parts from rust and corrosion.
· Store your eBike in a dry place. Dry storage will help prevent water damage as the wetness will be more likely to dry off than in a moist or damp area. Water that dwells is what causes damage to parts vulnerable to rust or corrosion.
Clean and Lubricate Your eBike Regularly
Riding an eBike in wet conditions can cause dirt and moisture to build up on the bike, leading to rust, corrosion, and other problems. Cleaning and lubricating your eBike regularly can help to prevent these problems and keep your bike running smoothly. Here are some of the benefits of cleaning and lubricating your eBike regularly:
1. Prevent rust and corrosion: Dirt and moisture can cause rust and deterioration on the metal parts of your eBike, such as the chain, gears, and brake pads. Cleaning and lubricating your eBike regularly can help to avert rust and corrosion and keep your bike running smoothly.
2. Extend the life of your eBike: Cleaning and lubricating your eBike regularly can help extend your bike’s life by preventing wear and tear on the moving parts.
3. Improve performance: Cleaning and lubricating your eBike can help improve your bike’s performance by reducing friction and wear on the moving parts.
4. Increase safety: Cleaning and lubricating your eBike can help increase your bike’s safety by ensuring the brakes, gears, and other components are working properly.
Here are some tips for cleaning and lubricating your eBike:
· Clean your electric Bike regularly: You should clean your eBike at least once a week (or more often) if you ride in wet conditions.
· Use a mild detergent and water solution: Do not use harsh compounds or solvents, as these can damage the components of your electric Bikes.
· Rinse your e-Bike thoroughly: After cleaning, rinse your eBike thoroughly with water to remove any soap residue.
· Dry your eBikes thoroughly: Dry your e-Bike thoroughly with a clean cloth after rinsing.
· Lubricate your eBike regularly: You should lubricate your eBike at least once a month (or, of course, more often if you ride in wet conditions).
· Use a good quality lubricant: Many different types of lubricants are available, so be sure to choose one designed for eBikes.
· Lubricate all moving parts: Be sure to lubricate all of the moving parts of your eBike, including the chain, gears, and brake pads.
Conclusion
Riding in the rain can be a nuisance when you’re not expecting it and a joy if you’re into getting down and dirty (let’s not forget soggy). We like to ensure that our riders need not worry about the weather damaging their bike’s electrical systems by using top-notch components in rugged, weather-resistant casings.
תגובות